PVC CORNER BEAD WITH MESH made from PVC has a thin coat mesh attached to its wings. You can achieve a strong reinforced corner with this meshed corner bead, which can be applied to any thin coat render wall.
In plastic
With integrated glass fibre mesh
Apply the reinforcing plaster in the width of the mesh over entire surface area. Insert the mesh angle bead perpendicular, flush, free of bubbles and folds. Reinforcing plaster should be trowelled off by a stainless steel trowel (to avoid double up of the reinforcing plaster in the edge area). When applying to the surface as reinforcement, spread out the mesh towards the
corner.
The reinforcement of reveals and edges of the reveals may be done in one application cycle with the help of a mesh angle bead. For this the integrated glass fibre mesh must be applied to the edge of the rear reveal and levelled into the existing reinforcement plaster. When using seal beads: overlap the strip of mesh of the seal bead and mesh angle bead for a minimum of 10 cm.
For exterior use
For corner formation with facade insulation systems
PVC CORNER BEAD WITH MESH available in 100 mm X 100 mm X 2.5 Mtr.