Sharjah
Sharjah
+971 6 567 9000 Sat - Thursday 08:00am - 6:00pm Sharjah, United Arab Emirates
Ceritified
ISO 9001:2015
DCL Ceritified
No. CL20020745
The Best
SUPPLIER IN UAE

NEOSEAL FLEX CR

One Component Crystalline Waterproof Coating

The NEOSEAL FLEX CR is a waterproofing coating that ensures the total and permanent solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water-bearing capillaries effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure.
NEOSEAL FLEX CR
Supplied as a powder and mixed to a slurry consistency with water. NEOSEAL FLEX CR is applied directly to concrete, block work or cement renders in areas where general waterproofing is required. In powder form, the product may be used as a dry shake on horizontal construction joints.

PROPERTIES

Compressive Strength after 28 days (ASTM C579) > 20N/mm2
Bonding Strength to concrete after 28 days (EN 1542) > 1.0 N/mm2
Chloride Ion Content ≤ 0.03%
Water Pressure: Can resist up to 5 bar of water pressure
Resistance to fire (BS 476-7): Class 1

Packaging

NEOSEAL FLEX CR is available in 25 Kg Bag.

Mixing

Always add water to NEOSEAL FLEX CR – not in reverse order.
Mix 1 part of water to 2.25-2.5 parts NEOSEAL FLEX CR powder by volume.

Application

NEOSEAL FLEX CR is applied by brush or spray onto the dampened substrate. Apply the material in 2 coats at right angles; apply the second coat whilst the first is firm, but “green” – usually 3-4 hours after first coat (dependent on temperature).

TECHNICAL DATA SHEET

NEOSEAL FLEX CR

Download TDS

PRODUCT DOCUMENTS AND BROCHURES